- Constructed with sintered Neodymium magnets allowing it to securely hold weapons weighing up to 50 lbs.
- Suitable for both parallel and perpendicular mounting.
- Compatible with nearly all gun types, including handguns, CCWs, rifles, shotguns, pistols, revolvers, and magazines.
- Lightweight and durable TPU cover allowing for safe, quick, and easy mounting without scratching, moving, and spinning.
- Double-sided adhesive tape, 4 heavy duty self-tapping screws, and 4 plastic anchors for quick, easy, and secure installation to avoid heavy duty magnetic gun holster falling.
- Allows users install and conceal heavy duty magnetic gun holster on any flat surface, including vehicle, wall, desk, door, safe, and bedside.
[vc_images_carousel images=”5480,5479,5478,5481,5477″ img_size=”full” autoplay=”yes”]
Product Specifications of Magnetic Gun Holster
| Dimension (mm) | 108 x 42 x 7.8 | Material | TPU |
| Standard package dimension (mm) | 145 x 62 x 24 | Pull force (lbs) | 50 |
| Unit weight (g) | 115 | Accessories | Screws and plastic anchors |
| Standard gross weight (g) | 150 | Logo, package, and printing | Can be customized |
Installation Instruments of Magnetic Gun Holster
Non-drill Solution with 3M Tape
Step 1: Thoroughly clean the magnetic gun holster and desired comfortable mounted area by rubbing alcohol and a clean cloth.
Step 2: Remove the protective liner of 3M tape.
Step 3: Stick 3M tape on the magnetic gun holster.
Step 4: Remove red protective liner of 3M tape.
Step 5: Stick the magnetic gun holster to the desired mounted area and secure it firmly in place for at least 60 seconds.
Drill Solution with Short Self-tapping Screws
Step 1: Mark the position for self-tapping screws.
Step 2: Pre-drilling holes for self-tapping screws.
Step 3: Fixing the magnetic gun holster in place and screw down the short self-tapping screws.
*Please refer to the non-drill solution if you use 3M tape simultaneously.
Drill Solution with Long Self-tapping Screws
Step 1: Mark the position for self-tapping screws.
Step 2: Pre-drilling holes for self-tapping screws.
Step 3: Putting plastic anchors into the holes.
Step 4: Fixing the magnetic gun holster in place and screw down the self-tapping screws.
*Please refer to the non-drill solution if you use 3M tape simultaneously.
