- Constructed with sintered Neodymium magnetsenabling it to securely hold weapons weighing up to 30 lbs.
- Suitable for both parallel and perpendicular mounting.
- Compatible with nearly all gun types, including handguns, CCWs, rifles, shotguns, pistols, revolvers, and magazines.
- Durable and lightweight silicone pad and ABS cover allowing for safe, quick, and easy mounting without scratching, moving, and spinning.
- Double-sided adhesive tape, 2 heavy duty self-tapping screws, and 2 plastic anchors for quick, easy, and secure installation to avoid tac magnet falling.
- Allows you install and conceal tac magnet on any flat surface, including vehicle, wall, desk, door, safe, and bedside.
Product Specifications of Tac Magnet
Dimension (mm) | 89 x 36.5 x 14.5 | Material | ABS |
Standard package dimension (mm) | 125 x 80 x 53 | Pull force (lbs) | 30 |
Unit weight (g) | 105 | Accessories | 3M tapes, screws and plastic anchors |
Standard gross weight (g) | 200 | Logo, package, and printing | Can be customized |
Installation Instructions
Non-drill Solution with 3M Tape
Step 1: Thoroughly clean the tac magnet and desired comfortable mounted area by rubbing alcohol and a clean cloth.
Step 2: Remove the protective liner of 3M tape.
Step 3: Stick 3M tape on the gun magnet.
Step 4: Remove red protective liner of 3M tape.
Step 5: Stick the tac magnet to the desired mounted area and secure it firmly in place for at least 60 seconds.
Drill Solution with Long Self-tapping Screws
Step 1: Mark the position for self-tapping screws.
Step 2: Pre-drilling holes for self-tapping screws.
Step 3: Putting plastic anchors into the holes.
Step 4: Fixing the tac magnet in place and screw down the self-tapping screws.
*Please refer to the non-drill solution if you use 3M tape simultaneously.